Everything is working well for internal calls but as soon as I want to call throught the GK from the Polycom is not working. The SIG is OK because I can pickup the call from the IP Phone, but we hear nothing. but, from the IP Phone (SCCP) to the Polycom it's working.
So what is the problem? Codec issue?
You will find attached an extract of the configuration, the result of 'show voice registered pool 1' and also 'sh sdspfarm sessions summary' which shows the CME DSP ressources used for incoming and outgoing calls.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...