Polycom SoundPoint IP 330 and Cisco Call manager 6.0

[nizar.houichi]

Hello,

I have a Cisco Call manager 6.0 and i would like to khnow if i can deploy Polycom SoundPoint IP 330 IP phones with it.

Thank you for help.

Houichi Nizar

[cristian.munoz]

Hi, What do you do?

i like to do the same. Pls. see the attch. I configured for this way, but not works.

Regards.

CMP

• Press the Menu Button

• Choose (3) Settings

• Choose (2) Advanced

• Password is 456

• Choose (1) Admin Settings

• Choose (2) SIP Configuration

• Select Server and add the IP Address of the Cisco Call Manager©

Confirm this selection and scroll down to Line1:

• Enter a Display Name

• Add the SIP Extension that was added within the Call Manager Menu as the Address

• Add the SIP Extension that was selected as the Username within the Call Manager User Menu as the Auth User ID

• Add the 5 digit Auth Password that was selected as the PIN Entry within the Call Manager User Menu.

• Optional add a Label that will be displayed next to the Line Key

• Press exit until the Prompt comes to save the Settings and the Phone will reboot after this.

[Steffen.Baier]

Also make sure that the SIP Extension you use has a User ID setup in the Owner User ID and the Digest User in the Call Manager Settings