Looking to see if a solution exists to test PSTN and/or Toll Free services for outage. These services would all route thru our existing CUCM. I have alerts setup to alert me if a gateway goes down or if the services are exhausted. We have a number of business that rely heavily on 800 and local number services for inbound traffic. When they stop working we only know when a customer complains and so our reaction time is lengthened.
Has anyone heard of or implemented either an in house (using CUCM) or vendor that is able auto test this on a scheduled time interval? Ideally I would prefer to keep in house understanding the caveots of using our own PSTN service to test.
The option to move TF traffic to cloud service is an expensive option that is why I am challenged to try and utilize our CUCM system or an in-expensive outside source.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...