Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Post DMA import to new CUCM server

Hi,

I've just migrated our PUB from 4.1.3 to 8.6.1 (via 7.1.5) onto new hardware with a new IP address for PUB.

Just wondering if there are any major post config changes I should be making given the pub has new IP address.

I've updated the extension mobility URL to match the new IP address of Pub.

I've also been through the Enterprise Parameters and checked that the new IP is listed where relevant and searched against the old IP (no instances found)

Any input would be appreciated.

Regards,

Liam

1 ACCEPTED SOLUTION

Accepted Solutions
Super Bronze

Post DMA import to new CUCM server

Hi Liam

Typically it's just:

System/servers menu (may have hostnames or IPs)

Enterprise Parameters

Phone Services (i.e. em etc)

So it sounds lik e you have it covered!

Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
2 REPLIES
Super Bronze

Post DMA import to new CUCM server

Hi Liam

Typically it's just:

System/servers menu (may have hostnames or IPs)

Enterprise Parameters

Phone Services (i.e. em etc)

So it sounds lik e you have it covered!

Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Post DMA import to new CUCM server

Thanks for the feedback Aaron

332
Views
0
Helpful
2
Replies
CreatePlease to create content