Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Postage machine with VG202

I've read all the posts but haven't seen any clear signs of success with being able to get a VG202 to work with a postage machine.

Of course, fax machines work without any issues but it's just with the postage machine.

The postage machine we're using is a CentorMail. The devices seem to get connected but then the call is dropped.

The VG202 has 15.1 on it and CallManager is 8.6

Call flow: Postage machine - VG202(Port 0/0)- H323 - CUCM 8.6 - H323 - 3900 VG w/ PRI - ISDN provider

VG202 config

 

stcapp register capability 0/0 modem-passthrough

stcapp ccm-group 1

stcapp

!

stcapp supplementary-services

 port 0/0

  fallback-dn 1998

 port 0/1

  fallback-dn 1997

!

voice service voip

 fax protocol pass-through g711ulaw

 modem passthrough nse codec g711ulaw

!

voice-card 0

!

archive

 log config

  hidekeys

!

interface FastEthernet0/0

 ip address 192.168.1.2  255.255.255.0

 duplex auto

 speed auto

!

interface FastEthernet0/1

 no ip address

 shutdown

 duplex auto

 speed auto

!

ip forward-protocol nd

!

no ip http server

no ip http secure-server

ip route 0.0.0.0 0.0.0.0 192.168.1.1

!

control-plane

!

voice-port 0/0

 input gain 6

 output attenuation 10

 timeouts initial 60

 timeouts interdigit 60

 timeouts ringing infinity

!

voice-port 0/1

 timeouts ringing infinity

!

ccm-manager sccp local FastEthernet0/0

!

mgcp profile default

!

sccp local FastEthernet0/0

sccp ccm 10.2.40.12 identifier 1 priority 1 version 7.0

sccp ccm 10.90.50.12 identifier 2 priority 2 version 7.0

sccp

!

sccp ccm group 1

 associate ccm 1 priority 1

 associate ccm 2 priority 2

!

dial-peer voice 1 pots

 service stcapp

 port 0/0

!

dial-peer voice 2 pots

 service stcapp

 port 0/1

!

line con 0

 exec-timeout 0 0

 login local

line aux 0

 login local

line vty 0 4

 login local

 transport input all

 

 

 

 

 

 

Everyone's tags (3)
1 REPLY

Hi.I suggest you to configure

Hi.

I suggest you to configure a voip dialpeer on your 3900 VG with answer-address option to match calling number  of VG202 port and set modem passthrough option.

Eg.

DN configured on VG port :5900

dial-peer voice XX voip

answer-address 5900

modem passthrough nse codec g711ulaw

codec g711ulaw

dtmf-relay h245-alphanumeric

no vad

 

HTH

 

Regards

 

Carlo

Please rate all helpful posts "The more you help the more you learn"
134
Views
0
Helpful
1
Replies
CreatePlease to create content