Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Power Injector Question

I have 2 4404 WLC's with about 100 1131AG LWAP's. Every once in a while an AP stops talking to the WLC and I am forced to physically unplug it and plug it back in to get it to start talking to the WLC again.

For AP's on a PoE switch I have been able to do this remotely by disabling the inline power on the interface, and then bringing it back up. That generally works.

However - and here is my somewhat silly, but hopeful question - for AP's that are connected to non-PoE switches with a Power Injector - is there any way to remotely disable the inline power on a Power Injector to affect a similar reboot? :)

Don't be too hard on me now. Cheers.

Rob

3 REPLIES
Hall of Fame Super Gold

Re: Power Injector Question

There is no way because injectors are passive devices.

You should figure out what bug freezes the APs in first place.

The alternative is a serial-controlled power switch.

New Member

Re: Power Injector Question

I'd love to find out what is causing the random freezing, but there doesn't appear to be any indication of what it is.

Thanks for the help!

Hall of Fame Super Gold

Re: Power Injector Question

For other devices, it was said that mysterious freezes were caused by the radio module catching interference, but I have no evidence to support this theory.

111
Views
4
Helpful
3
Replies