I have two hunt group and I want to setup prefix dialing where I can get the agents to type in some digits before the number they want to dial and it will mask out the DDI number.
At the moment, if the agent dial an external number, the extension number is masked out. I have tried to setup a Prefix dial to that when they dial #*xx-xxxxxxx where xx is the area code and the #* is the prefix digit and when it matched this is will mask out the Hunt Group DDI
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...