Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

prefixing extra numbers on dial-peers

Hi,

how can i add some extra digits without informing users. Lets say if users dialing 90501234567, at backend, i want to add 9088880501234567.

  • IP Telephony
Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

prefixing extra numbers on dial-peers

Just change prefix 05 to 908888050, so it should look like this:

dial-peer voice 13 pots

prefix 908888050

Chris

5 REPLIES
Cisco Employee

prefixing extra numbers on dial-peers

If I remember correctly this can be done using a translation pattern to add extra digits along with "no supplementary-service h225-notify cid-update" to prevent the phone display from changing.

Hall of Fame Super Silver

prefixing extra numbers on dial-peers

If this is a pots dial peer you can simply add "prefix" command to the dial peer, if this is on voip dial peer you will need to use translation rule. The command Joe is referring should prevent the user from seeing the updated dialed number, though that will only work for H323 GW, if you are using SIP I would imagine you would need to add a sip profile and modify the header.

HTH,

Chris

New Member

prefixing extra numbers on dial-peers

dial-peer voice 13 pots

description Mobile

destination-pattern 905........$

port 0/0/0:15

prefix 05

where will i add? at dialpeer or in cucm (route pattern)

Hall of Fame Super Silver

prefixing extra numbers on dial-peers

Just change prefix 05 to 908888050, so it should look like this:

dial-peer voice 13 pots

prefix 908888050

Chris

New Member

prefixing extra numbers on dial-peers

Thanks, it worked.

459
Views
5
Helpful
5
Replies
This widget could not be displayed.