Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Presence Call List for 9951

Hello Everyone,

I have an enviroment of UCME running on the top of  ISR router we have configured Presence call list but looks like it did work for sccp and not for SIP Phone 9951 (sip9951.9-1-1SR1) I made eveything follow every thread and did all the required configuration I even reloaded the router but look like it do not work for SIP and work fine for sccp.

Sample of configuration:

presence

presence call-list

max-subscription 500

watcher all

allow subscribe

and I configure allow watch command under all DNs.And I doubled checked my configuration this odd I appreciate the Expert guide to address and solve this issue.

thanks and Regards,

4 REPLIES
Cisco Employee

Presence Call List for 9951

Hi Karim,

Can you please check the config as per the following link

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepres.html#wp1010561

If it does not work please share the running config from the CME.

Manish

Presence Call List for 9951

Dear Manish,

I already followed cisco guide that you sent and here is my configuration below:

presence

presence call-list

max-subscription 500

watcher all

allow subscribe

!

sip-ua

mwi-server ipv4:192.168.1.7 expires 3600 port 5060 transport udp unsolicited

registrar ipv4:192.168.1.1 expires 3600

sip-server ipv4:192.168.1.1

host-registrar

presence enable

refer-ood enable

!

!

!

!

voice register global

mode cme

source-address 192.168.1.1 port 5060

bandwidth video tias-modifier 512000 negotiate end-to-end

timeouts interdigit 3

max-dn 100

max-pool 100

authenticate register

authenticate realm cisco

timezone 29

date-format D/M/Y

voicemail 800

url directory http://192.168.1.1/localdirectory

file text

create profile sync 0003561540386854

camera

video

!

voice register dn  1

number 222

call-forward b2bua noan 800 timeout 15

allow watch

shared-line max-calls 16

mwi

!

voice register dn  2

number 333

call-forward b2bua busy 800

call-forward b2bua noan 800 timeout 15

allow watch

mwi

!

voice register dn  3

number 444

call-forward b2bua busy 800

call-forward b2bua noan 800 timeout 15

allow watch

mwi

!

voice register dn  4

number 555

call-forward b2bua all 111

call-forward b2bua busy 800

call-forward b2bua noan 800 timeout 15

allow watch

mwi

!

voice register dn  5

number 666

call-forward b2bua busy 800

call-forward b2bua noan 800 timeout 15

allow watch

mwi

!

voice register pool  1

id mac xxxx.xxxx.xxxx

type 9951

number 1 dn 1

cor incoming int-CSS default

presence call-list

dtmf-relay rtp-nte sip-notify

voice-class codec 1

no vad

after-hour exempt

username neo password 12345

conference drop-mode creator

conference admin

camera

video

!

voice register pool  2

id mac xxxx.xxxx.xxxx

type 9951

number 1 dn 2

cor incoming int-CSS default

dtmf-relay rtp-nte sip-notify

voice-class codec 1

username neo password 12345

after-hour exempt

conference drop-mode creator

conference admin

camera

video

!

voice register pool  3

id mac xxxx.xxxx.xxxx

type 9951

number 1 dn 3

cor incoming int-CSS default

dtmf-relay rtp-nte sip-notify

voice-class codec 1

username neo password 12345

after-hour exempt

!

voice register pool  4

id mac xxxx.xxxx.xxxx

type 9951

number 1 dn 4

cor incoming int-CSS default

dtmf-relay rtp-nte sip-notify

voice-class codec 1

username neo password 12345

after-hour exempt

!

voice register pool  5

id mac xxxx.xxxx.xxxx

type 9951

number 1 dn 5

cor incoming int-CSS default

dtmf-relay rtp-nte sip-notify

voice-class codec 1

after-hour exempt

cor incoming int-CSS default

dtmf-relay rtp-nte sip-notify

voice-class codec 1

username neo password 12345

after-hour exempt

Cisco Employee

Presence Call List for 9951

Hi Karim,

The config looks good, which firmware is running on the 9951's? It may be affected by the following

http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtq39163

Presence BLF support on Call History feature development

Symptom:
This feature is a parity of the TNP phones. It  enables the users to see the presence status of the line numbers in the  Call History list for 9971/9951/8961.

Conditions:
Enable the enterprise parameter "BLF For Call Lists".

Workaround:
None

Can you please upgrade to the latest firmware available for 9951 from cisco.com and test it.

Manish

Presence Call List for 9951

Thank you Manish for your reply I will do upgrade for one phone and update you with the results.

293
Views
0
Helpful
4
Replies
CreatePlease login to create content