08-22-2012 08:12 AM - edited 03-16-2019 12:49 PM
Hello everyone,
can anyone tell me the correct part number for a PRI card that goes into a 2800 series router and above? I am coming up with 3 different part numbers, all different.
Thanks in advance. All replies rated.
Solved! Go to Solution.
08-22-2012 08:22 AM
They are probably all correct, if this is non G703 then use:
VWIC3-1MFT-T1/E1 for one port
VWIC3-2MFT-T1/E1 for dual port
VWIC3-4MFT-T1/E1 for qued port
HTH,
Chris
08-22-2012 08:22 AM
They are probably all correct, if this is non G703 then use:
VWIC3-1MFT-T1/E1 for one port
VWIC3-2MFT-T1/E1 for dual port
VWIC3-4MFT-T1/E1 for qued port
HTH,
Chris
08-22-2012 01:24 PM
Angel , Chris.
I think there is a wee type here.
You can only use a VWIC3 in ISR-G2 routers
(1900, 2900 3900 ranges)
For the 2880 range you need to stick with VWIC2s
http://www.cisco.com/en/US/prod/collateral/routers/ps5855/prod_qas0900aecd8028d2e5.html
Regards,
Alex.
Please rate useful posts.
08-22-2012 02:33 PM
Oops, I misread the post as 29XX as they've been around for some time now :-) Thanks Alex for correcting me (+5).
Chris
08-22-2012 08:05 PM
Thanks to both of you. Teamwork! Yay!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: