PRI configuration in 2951 router

[mohamed370]

Hi Experts,

What are the ISDN- E1 configuration commands for new Cisco router 2951 ,which got the IOS version 15.X. I am not able to do it on the new series router.

Please suggest.Thanks in advance!

[Jaime Valencia]

The commands are the same.

Have you checked that you have the voice package to do that???

EDIT: Review the new IOS model here

http://www.cisco.com/en/US/partner/prod/collateral/routers/ps380/ISRG2_DeploymentGuide.pdf

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

[mohamed370]

yes i have checked. I am not able to use any ISDN commands.

[Jaime Valencia]

Do you have DSPs to use the PRIs?

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

[Support Albakom]

At first you must have the right IOS for voice in the router.

At second: what E1 interface you have? possible you must do something like this: card type e1 0 0 prior you can set ISDN commands.

Look at this as an example:http://www.cisco.com/en/US/docs/routers/access/1700/1721/software/feature/guide/t1e11721.html#wp142465