Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PRI slip errors

What can be done to eliminate slip errors on a PRI? I have already tried the network-clock-participate command. I am still gettings slips.

Thanks,

3 REPLIES
Green

Re: PRI slip errors

PRI is connected to PSTN or to a PBX?

Which card, platform and IOS?

New Member

Re: PRI slip errors

The router is a 2811 running IOS 12.3(11)T5.

This router is connecting to a Cisco IAD using a MultiFlex Trunk card. The IAD is provided by the Telco.

Thanks,

Chris

Green

Re: PRI slip errors

Although you say you tried the network-clock-participate command

Did you also select the clock for use - example :-

!

network-clock-participate wic 0

network-clock-select 1 E1 0/0

!

1 = the clock preference and 1 is the highest preference

show network-clocks

Network Clock Configuration

---------------------------

Priority Clock Source Clock State Clock Type

1 E1 0/1/0 GOOD E1

10 Backplane GOOD PLL

Current Primary Clock Source

---------------------------

Priority Clock Source Clock State Clock Type

1 E1 0/1/0 GOOD E1

You want the result to look like the above.

Hope this helps

Regards, Alex. Please rate useful posts.
167
Views
5
Helpful
3
Replies
CreatePlease login to create content