Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PRI Trunk group help

Lets say I have 3 T1 PRI coming in from the PSTN, not an nfas group. I want to route all outbound calls to the PSTN. How to I group the 3 PRIs into 1 logical link?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PRI Trunk group help

Easy Peasy lemon squeezy!!

config's below..

trunk group DMS

carrier-id TW

hunt-scheme sequential both up

!

controller T1 1/0

framing esf

linecode b8zs

pri-group timeslots 1-24

trunk-group DMS timeslots 1-24 preference 1

!

controller T1 1/1

framing esf

linecode b8zs

pri-group timeslots 1-24

trunk-group DMS timeslots 1-24 preference 2

!

controller T1 1/0/0

framing esf

linecode b8zs

pri-group timeslots 1-24

trunk-group DMS timeslots 1-24 preference 3

!

dial-peer voice 2002 pots

trunkgroup DMS

destination-pattern 9[2-9]..[2-9]......

forward-digits 10

!

HTH, Please rate useful posts!

Chad

5 REPLIES

Re: PRI Trunk group help

Easy Peasy lemon squeezy!!

config's below..

trunk group DMS

carrier-id TW

hunt-scheme sequential both up

!

controller T1 1/0

framing esf

linecode b8zs

pri-group timeslots 1-24

trunk-group DMS timeslots 1-24 preference 1

!

controller T1 1/1

framing esf

linecode b8zs

pri-group timeslots 1-24

trunk-group DMS timeslots 1-24 preference 2

!

controller T1 1/0/0

framing esf

linecode b8zs

pri-group timeslots 1-24

trunk-group DMS timeslots 1-24 preference 3

!

dial-peer voice 2002 pots

trunkgroup DMS

destination-pattern 9[2-9]..[2-9]......

forward-digits 10

!

HTH, Please rate useful posts!

Chad

New Member

Re: PRI Trunk group help

Ok thats what I'm lookin for, I dont have to specify a trunk group on the voice port or the serial interfaces?

Re: PRI Trunk group help

Nope.. I pasted the only stuff you need to make it work

HTH,

Chad

New Member

Re: PRI Trunk group help

2 more quick questions if you don't mind.

carrier-id <- does this matter, or is it like a description on an interface?

and in the dial plan for outbound POTS, I see you did a forward digits 10, does it forward 10 digits from left to right or right to left?

thanks for your help. I'm a voice noob

New Member

PRI Trunk group help

Yes it does matter.

A carrier ID is a new attribute consisting of up to 127 alphanumeric characters that identifies the carrier handling an H.323 or SIP call. One or more trunk groups can refer to the same carrier ID.

It will always forward the digits from right to left

Cheers,

Akki

6347
Views
0
Helpful
5
Replies
CreatePlease to create content