problem calling outside numbers starting with 1 (CME)
I'm new in IPTel and have the following problem, Idid an installation with a CME, and in the first week everything looked normal, but now the customer wanted to call the outside number 1207 and could not reach this number also when dialing 01207. The numbers that are forseen are 014800001 til 0148000099. the customer wanted from me to use only 2 digits (01 - 99) internal. I did mention that problems could arise, is there a workaround to solve this problem ? Can you advice, what to do, don't want to go to 3 or 4 digits.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...