09-08-2008 12:20 AM - edited 03-15-2019 01:06 PM
Hi,
I've got a CCME and I have a problem with fax, sometimes the fax (sent or received) are cut and I cannot read the page.
I have a server fax linked with ATA and the configuration is:
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
no service password-encryption
service sequence-numbers
!
no aaa new-model
memory-size iomem 10
clock timezone CET 1
clock summer-time CEST recurring last Sun Mar 2:00 last Sun Oct 3:00
network-clock-participate wic 0
network-clock-select 1 BRI0/0/0
dot11 syslog
no ip source-route
!
!
ip cef
!
!
no ip bootp server
no ip domain lookup
multilink bundle-name authenticated
!
isdn switch-type basic-net3
!
!
voice-card 0
no dspfarm
!
!
voice call send-alert
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
redirect ip2ip
h323
no h225 timeout keepalive
call preserve limit-media-detection
modem passthrough nse codec g711alaw
!
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729r8
!
!
!
voice class h323 1
h225 timeout tcp establish 3
!
!
voice translation-rule 1
rule 2 /^32\([0,3,7-9]\)\(.*\)/ /032\1\2/
rule 3 /^33\([0,3-9]\)\(.*\)/ /033\1\2/
rule 4 /^34\([0,3,6-9]\)\(.*\)/ /034\1\2/
rule 6 /^36\([0,3,6,8]\)\(.*\)/ /036\1\2/
rule 8 /^38\([0,3,8,9]\)\(.*\)/ /038\1\2/
rule 9 /^39\([0-3]\)\(.*\)/ /039\1\2/
rule 15 /^\(\)/ /00\1/
!
!
voice translation-profile AddZero-Telecom
translate calling 1
archive
log config
hidekeys
!
!
ip tcp synwait-time 10
ip tftp source-interface FastEthernet0/0
ip rcmd source-interface FastEthernet0/0
!
interface FastEthernet0/0
ip address 192.168.35.254 255.255.255.0
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr 192.168.35.254
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/0/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn map address .* plan isdn type unknown
isdn send-alerting
isdn sending-complete
isdn skipsend-idverify
trunk-group BRI-Mecavit 3
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.35.1
!
!
ip http server
no ip http secure-server
!
snmp-server community public RO
snmp-server ifindex persist
!
!
!
!
voice-port 0/0/0
translation-profile incoming AddZero-Telecom
disc_pi_off
echo-cancel coverage 48
no vad
compand-type a-law
cptone IT
timeouts interdigit 5
!
!
!
!
dial-peer voice 1 pots
description Chiamate da Pstn
answer-address 0T
incoming called-number XXX
fax rate disable
direct-inward-dial
port 0/0/0
!
!
dial-peer voice 5 pots
destination-pattern 0T
progress_ind setup enable 3
progress_ind alert enable 8
progress_ind progress enable 1
fax rate disable
port 0/0/0
num-exp XXXX 99
!
telephony-service
load ATA ATA030100SCCP040211A.zup
max-ephones 24
max-dn 48
ip source-address 192.168.35.254 port 2000
timeouts interdigit 3
user-locale IT
network-locale IT
time-zone 23
time-format 24
date-format dd-mm-yy
max-conferences 4 gain -6
call-forward pattern .T
call-forward pattern 0T
moh music-on-hold.au
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .T
transfer-pattern 0T
transfer-pattern 4T
secondary-dialtone 0
directory last-name-first
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
!
!
ephone-dn 20 dual-line
number 99
label Fax
name Fax
!
!
!
ephone 14
mac-address 001F.CA35.7A79
type ata
button 1:20
Can you help me??
09-08-2008 03:51 AM
Hi Luca,
Can you confirm that the ATA has these settings:
audiomode = 0x00150015
connectmode = 0x90000400
lbrcodec = 3
And also make sure that the fax machine is not SuperG3 enabled.
Hope this helps.
Thanks,
Michael.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: