07-31-2012 02:03 PM - edited 03-16-2019 12:28 PM
I was installing Cisco IP Phones 7945 and 6945 using CUCME 9.0 in a 2921 router. The problem is that the 6945 phones don´t register in CUCME; i have tried with SCCP and SIP with the same results. The firmware that the phones are using is 9-2-1-0. The IOS of the router is 15-2-4 universal. The 7945 phones register with no problems; the problem is only with the 6945 phones.
07-31-2012 02:09 PM
You can take "debug ephone register" with "term mon" to see what's happening.
08-01-2012 07:45 AM
I issue the debug command and term monitor in the router. When I plug the phone, it doesn´t give me any result.
08-01-2012 09:55 AM
Then you can take debug tftp events to see what happens before registration.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: