Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Problem using asterisk symbol (*) in Translation Rule

Hello Everybody 

 

Please any suggestion to make a translation from *100.. to 011056000

 

I have tried using num-exp and a translation rule but symbol asterisk is not supported as a prefix.

 

Thanks in advance

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

try CUBE(config)#voice

try 


CUBE(config)#voice translation-rule 1
CUBE(cfg-translation-rule)#rule 1 /\*100../ /011056000/

 

2 REPLIES
Cisco Employee

try CUBE(config)#voice

try 


CUBE(config)#voice translation-rule 1
CUBE(cfg-translation-rule)#rule 1 /\*100../ /011056000/

 

It works fine! Thanks a lot

It works fine!

 

Thanks a lot javelkur.

 

Regards

48
Views
0
Helpful
2
Replies