Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Problem with 6945 - dont register in SRST

Hi everybody,

In our office we buy new phones 7965 and 6945, 7965 is working, but the 6945 dosen't work in SRST mode.

Any ideas ??

CUCM - 7.1.5

6945 - SCCP-6945.9-2-2-4

Router - 3925 - Version 15.2(3)T1

Tks,

Everyone's tags (3)
4 REPLIES
Hall of Fame Super Silver

Problem with 6945 - dont register in SRST

Are you sure you are running it as SCCP not SIP?

Can you post "debug ephone register" and "sho run"?

Is the phone registered properly in CUCM and does its device pool reference proper SRST reference?

Chris

New Member

Re: Problem with 6945 - dont register in SRST

Yes, is running in SCCP.

Show run:

call-manager-fallback

secondary-dialtone 0

max-conferences 8 gain -6

transfer-system full-consult

timeouts interdigit 6

ip source-address 10.154.116.2 port 2000 strict-match

max-ephones 200

max-dn 400

system message primary SURVIVAL MODE

transfer-pattern .T

time-format 24

date-format dd-mm-yy

in debug shows nothing on the 6945 only the 7965

7965 and 6945 using the same device pool.

Regards

Hall of Fame Super Silver

Problem with 6945 - dont register in SRST

Can you post the debug?

Chris

New Member

Problem with 6945 - dont register in SRST

Hello Sir,

I am running into the same issue as well. My 6945 phones will not register to CUCM 8.6 with gateway running 15.2(3) T1 code on it running SRST. Did you have any luck getting  those phones registered on SRST mode?

Kindly let me know please.

Regards

Jeesh

652
Views
0
Helpful
4
Replies