Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with CME hunt group

Hi,
The hunt group is not working properly.
Call comes in to ephone-dn 10 (reception) if no answer goes to 65 which is the hunt group.
It does not reach 7710. It rollers over to second dn and then call drops. If I delete the list and add only one dn, it works.
Can some one tell me why the hunt group in not working when I add more than one dn?

This works, it ends up in 7710 greeting.
ephone-hunt 1 sequential
pilot 65
list 25
final 7710
timeout 7

Add second dn after ringing call drops and does not hit the final 7710
ephone-hunt 1 sequential
pilot 65
list 22, 25
final 7710
timeout 7, 7

Full config attached.

Thanks,

Solomon

12 REPLIES
Hall of Fame Super Gold

Re: Problem with CME hunt group

Exact IOS and phone FW?

New Member

Re: Problem with CME hunt group

IOS : c2800nm-spservicesk9-mz.124-9.T7

7940 - P00303010200

Hall of Fame Super Gold

Re: Problem with CME hunt group

Update IOS to 12.4(22) YB5.

Phones to 8.0(10)

New Member

Re: Problem with CME hunt group

Last night I updated the IOS to 12.4(22) YB5 and phone firmware to 8.0(10). It did not fix the problem. I deleted the ephone-hunt and created voice hunt-group. That fixed the problem.

Hall of Fame Super Gold

Re: Problem with CME hunt group

Strange. Voice hunt-group should not have nothing to do with ephone-hunt.

New Member

Re: Problem with CME hunt group

I am just say that the ephone-hunt did not work and as a work around created a voice hunt-group.

Hall of Fame Super Gold

Re: Problem with CME hunt group

Can you try

ephone-dn  25  dual-line
  no ephone-hunt login

And same for 22.

Then, show ephone-hunt

Anonymous
N/A

Re: Problem with CME hunt group

Solomon,

You are missing "HOP" command under ephone hunt...

set it to 2 that way it will go over both numbers 22 & 25 before hitting the final number 7710 (voicemail for ext 10)...

HTH

Vikram

Hall of Fame Super Gold

Re: Problem with CME hunt group

No "hop" command exists under ephone-hunt.

I have many installations like that and all do work without any problem.

Anonymous
N/A

Re: Problem with CME hunt group

There is HOP command under ephone hunt.

Solomon has it configured as sequential and under sequential Yes there is no need for hop, but if its set to PEER or Longest IDLE then yes its there

I didn't see initially that he had it configured as sequential... :-)

Hall of Fame Super Gold

Re: Problem with CME hunt group

--

Anonymous
N/A

Re: Problem with CME hunt group

That is exactly what I said in the last post....

HOP command is not allowed under sequential type ephone-hunt

BUT if you set the ephone hunting to PEER or LONGEST IDLE its there try it....

Date: Tue, 16 Mar 2010 18:30:23 -0600

From: supportforums-donotreply@cisco.com

To: abrolv@hotmail.com

Subject: New message: "Problem with CME hunt group"

Vikram Abrol,

A new message was posted in the Discussion thread "Problem with CME hunt group":

https://supportforums.cisco.com/message/3036596#3036596

Author : p.bevilacqua

Email : pbevila@fastmail.fm

Profile : https://supportforums.cisco.com/people/p.bevilacqua

Message:

787
Views
0
Helpful
12
Replies
CreatePlease to create content