I have an CME 4.1 with IOS 12.4.15T3. I followed the admin guide to implement custom ring tones. I tftp'ed every single file including the ringlist.xml and distinctiveringlist.xml and followed the configuration as mentioned above. Still my 7911G phones do not get any new ringtones. When debugging the TFTP events they also do not request for the ringlist.xml I also factory defaulted a phone and let it get a complete new configuration, but still no ringtones. Maybe somebody got an idea about this ?
How do you mean that ? When i go into user preferences and then select ringtones i only see the two default ringtones chirp1 and chirp2. I do not see any other options there to download the ringlist.xml ? Where can i find that then ?
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...