problem with FXO interface

[zakariaa azzouz]

Hi

      I have a problem with IOS of Router 3825 that not display the interface fxo in "show Run" . But when i do the "show version " , FXO interface founded .

I think i have a problem with the IOS that not support FXO Interface . I need a IOS that is support voip and FXO Interface .

Please find attach the show ver & show run

Thanks for your help .

Best Regards .

[Sreekanth Narayanan · Accepted solution]

Hi zakariaa,

Can you provide the show inventory? Do you have PVDM cards installed on this router? You will need them in order for fxo ports to be recognized.

Thanks

Sree

[zakariaa azzouz]

Hi Sreekanth

Thanks for your help .the problem has resolved by changing the PVDM cards .

Thanks & Regards

[Sreekanth Narayanan]

That's great Zakariaa. Thanks for updating.

Regards,

Sreekanth

[islam.kamal · Accepted solution]

Hi Zakariaa

1- Please find the supported cards as the below

http://www.cisco.com/c/en/us/support/docs/routers/3600-series-multiservice-platforms/12444-2fxo-vic.html

2- Please  check your PVDM .

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/22377-e-doc-voice-card-recognition.html

3- If the problem is not regarding your PVDM , so i think you can use  ipvoicek9-mz.124-21a.bin

Thanks

Please rate all useful information