Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problem with ISDN PRI

Hi,

I had VWIC2-1MFT-T1/E1 on my router 2811. On the other side is provider router (cisco).

I have changed my wic card with VWIC2-2MFT-T1/E1. Now I got error:

*Oct 17 07:08:08.529: ISDN Se0/0/0:15 Q931: SETUP pd = 8 callref = 0x0085

Bearer Capability i = 0x8090A3

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98381

Exclusive, Channel 1

Calling Party Number i = 0x2181, '16500904'

Plan:ISDN, Type:National

Called Party Number i = 0xA1, '0913885126'

Plan:ISDN, Type:National

*Oct 17 07:08:08.541: ISDN Se0/0/0:15 Q921: User RX <- RR sapi=0 tei=0 nr=11

*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=15 nr=11

*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q931: CALL_PROC pd = 8 callref = 0x8085

Channel ID i = 0xA98381

Exclusive, Channel 1

*Oct 17 07:08:08.577: ISDN Se0/0/0:15 Q921: User TX -> RR sapi=0 tei=0 nr=16

*Oct 17 07:08:08.593: ISDN Se0/0/0:15 Q921: User RX <- INFO sapi=0 tei=0, ns=16 nr=11

*Oct 17 07:08:08.593: ISDN Se0/0/0:15 Q931: DISCONNECT pd = 8 callref = 0x8085

Cause i = 0x82A6 - Network out of order

After some testing (didn't work anything), I have returned the old card but it was the same problem.

Why is that so and what I can do now?

Thanks

1 REPLY
New Member

Re: Problem with ISDN PRI

Solved.

Cable problem.

124
Views
0
Helpful
1
Replies