I have a situation where MoH unable to playout for some reason when call coming from outside call to IP Phone. After I remove the MoH wav file and multicast and reapply to the router config, the MoH is working again.
External call --> ISDN PRI --> CCM (CTI RP) --> User Agent on hold (External caller unable to hear MoH)
The best way to do this is to create a common profile for User Hold and Network Hold after you create the MOH audio source (which you have already done.) I believe that you can BAT the common profile in to all the phones in your network, this will take care of User Hold. To change network hold, you should change your Voicemail Ports in CM so that they refer to the new commond profile. So, if you have 16 or maybe 96 ports for voicemail, all of them should reference the new common profile. I believe you can BAT that as well. This change will fix the on-hold music played diring call transfers.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...