Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

Problem with playing AU message using AA TCL script on Cisco 2801 with CME

I’ve problem with TCL script & auto attendant service. I have Cisco 2801 ISR with CME. When I configure BACD with AA service it starts working well for the first time. Welcome message in .au file is played and DTMF allow to select internal phone number. Problem is if I will call again, I can’t hear any message although debug shows that the Welcome message is plaing. In this case also DTMF  working.

Please Help.

Thank You !

****************
Tomasz Hinz       

********************************* Comel - Tomasz Hinz
5 REPLIES
Hall of Fame Super Gold

Problem with playing AU message using AA TCL script on Cisco 280

Update IOS and check again.

New Member

Problem with playing AU message using AA TCL script on Cisco 280

As you can see in config2801.txt.zip file I using newest IOS version available for this router

boot system flash flash:c2801-spservicesk9-mz.151-4.M6.bin

*********************************
Tomasz Hinz

********************************* Comel - Tomasz Hinz
Hall of Fame Super Gold

Problem with playing AU message using AA TCL script on Cisco 280

Try taking debug voice application media stat.

New Member

Re: Problem with playing AU message using AA TCL script on Cisco

I made two debugs i attached txt files,

1. First, just when router started and for fist time everythink is ok.

2. Secod, when I hear only silence.

I can see differences but i'm not sure what I schould do next.           

*********************************
Tomasz Hinz       

********************************* Comel - Tomasz Hinz
New Member

Re: Problem with playing AU message using AA TCL script on Cisco

Dont know whether it will solve your problem or not but..

I found it weird that welcome prompt name does not start with an  _ (underscore) .

Have you consulted the below link?

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html#wp1012403

“If you have knowledge, let others light their candles in it.”
432
Views
0
Helpful
5
Replies
CreatePlease to create content