Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

problem with some 1-866 toll-free numbers

System:

CCM 5.1, 2821 12.4(11) H.323 gateway

Problem:

Cannot call some 1866-XXXXXXX numbers. When making calls to several specific 1866 numbers, it displays "connected" on the phone, but user can hear nothing. There is no problem with 911, local and long distance calls.

The attachment is the debug information from a bad call and a good call. I cannot see any difference between them.

Thanks in advance for any help.

1 REPLY
Silver

Re: problem with some 1-866 toll-free numbers

Using H.323 protocol?

Bad call has Progress and alerting. Good call does not.

If using H.323 make sure you have the call process tones commands in there.

hmmm, where's that document.

Try this.

http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml

459
Views
0
Helpful
1
Replies
CreatePlease to create content