08-19-2013 05:20 PM - edited 03-16-2019 06:56 PM
Hi all,
On this Branch we are having problems to register 69XX phones through a 512kbps frame relay link to HQ. Phones 79XX registers normally. We know the problem is QOS, because without our QOS configuration the 69XX phones register normally. Anyone can see the problem through this QOS configuration??
class-map match-any VoIP
match access-group name VOIP
match dscp ef
class-map match-any Gold
match access-group 111
match dscp af31
!
policy-map LINK
class VoIP_IN
priority 154
police cir 154000
conform-action set-dscp-transmit ef
exceed-action drop
class Gold_IN
bandwidth 282
police cir 512000
conform-action set-dscp-transmit af31
exceed-action drop
class class-default
fair-queue
random-detect
!
interface Serial0/0
no ip address
max-reserved-bandwidth 90
encapsulation frame-relay IETF
frame-relay traffic-shaping
frame-relay lmi-type q933a
!
interface Serial0/0.201 point-to-point
ip address 200.10.10.10 255.255.255.252
frame-relay interface-dlci 111 CISCO
class FRAME_512
frame-relay ip rtp header-compression
!
ip access-list extended VOIP
permit ip 10.1.1.0 0.0.0.255 any
!
!
map-class frame-relay FRAME_512
frame-relay cir 512000
frame-relay bc 5120
frame-relay be 0
frame-relay mincir 512000
frame-relay fragment 640
service-policy output LINK
logging trap debugging
!
access-list 111 permit tcp any any range 2000 2002
access-list 111 permit tcp any range 2000 2002 any
Thanks a lot!!
08-19-2013 06:47 PM
are your 69xx configured to use sip? (because acl 111 'catches' sccp)
=============================
Please remember to rate useful posts, by clicking on the stars below.
=============================
08-19-2013 07:10 PM
No, It is SCCP.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: