I am new to the Cisco Call Manager and IP Telephony. I am also volunteering for a non-profit museum that had a 1760 with several 7940/7941 phones donated. All but three of the phones display correct time zone settings. The three phones (two 7940 and one 7941) have a file not found error when booting. The profile file they are looking for is in the flash of the 1760. All phones are on the correct VLAN and are pulling correct IP information.
A side note is that due to the load on the 1760, we can not access the GUI of the 1760. One option there is to remove the LAN segment, login to the GUI and make any changes needed. One of my options that I have not tried yet. Is replacing one of the problem phones with a "spare" and updating the MAC for the user.
The phones are reporting "File not found: P00308000500"
Here is the show version and show flash from the 1760 for reference.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4