Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with dutch locale

According to the manuals CCME 4.1 should have the dutch locale build-in for the 7940-7960 phone. But as soon as I boot these phones they need to have following files:

Netherlands/7960-font.xml

Netherlands/7960-kate.xml

Netherlands/7960-tones.xml

It says: "Error updating locales"

Ofcourse these files don't exist in these folders because I can't download them for the dutch locale, since they should be build-in in the IOS.

Anyone any idea's?

12 REPLIES
Highlighted
Hall of Fame Super Gold

Re: Problems with dutch locale

Hi, can you check output of "show telephony-service" ? The dictionary should be in there.

New Member

Re: Problems with dutch locale

Hi,

I am trying to implement dutch locale in one of my Nederland sites.

Could you please help me?

1) My callmanager setup is in UK and Nederlands is the remote site. Nederlands people require the Dutch and English languages on their phone. Where and how I can implement this setup?

2) Will the Dutch users get added to the Corporate Directory or will there be a separate directory?

Would be most thankful if I get the reply as soon as possible.

Many thanks,

Mady

Hall of Fame Super Gold

Re: Problems with dutch locale

Hi Mady,

I seem to remember that you've already received an answer to your questions in another thread, so perhaps you can locate it with the search function of the forum,

Hall of Fame Super Red

Re: Problems with dutch locale

New Member

Re: Problems with dutch locale

CONFIG (Version=4.1(0))

=====================

Version 4.1(0)

Cisco Unified Communications Manager Express

For on-line documentation please see:

www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.htm

ip source-address 192.168.11.1 port 2000

service dnis overlay

no auto-reg-ephone

load ata ATA030100SCCP040211A

load 7961 SCCP41.8-2-2SR1S

load 7960-7940 P00308000400

max-ephones 30

max-dn 150

max-conferences 4 gain -6

dspfarm units 0

dspfarm transcode sessions 0

conference software

hunt-group report delay 1 hours

hunt-group logout DND

max-redirect 5

cnf-file location: TFTP

cnf-file option: PER-PHONE

network-locale[0] NL (This is the default network locale for this box)

network-locale[1] US

network-locale[2] US

network-locale[3] US

network-locale[4] US

user-locale[0] NL (This is the default user locale for this box)

user-locale[1] US

user-locale[2] US

user-locale[3] US

user-locale[4] US

srst mode auto-provision is OFF

srst ephone template is 0

srst dn template is 0

srst dn line mode is single

phone service videoCapability 1

time-format 24

date-format dd-mm-yy

timezone 28 Central Europe Standard/Daylight Time

no transfer-pattern is configured, transfer is restricted to local SCCP phones only.

keepalive 30 auxiliary 30

timeout interdigit 5

timeout busy 10

timeout ringing 180

timeout ringin-callerid 8

caller-id name-only: enable

web admin system name Admin

web admin customer name Customer

edit DN through Web: enabled.

edit TIME through web: enabled.

Log (table parameters):

max-size: 150

retain-timer: 15

create cnf-files version-stamp 7960 Feb 10 2008 16:06:24

transfer-system full-consult

local directory service: enabled.

Extension-assigner tag-type ephone-tag.

Hall of Fame Super Gold

Re: Problems with dutch locale

Hi, as mentioned above if you do "show telephony-service tftp-bindings" you will see which localization files are made available to phones. The one with the translated strings is 7960-dictionary.xml.

New Member

Re: Problems with dutch locale

I'm using an external TFTP server.

But the problem is that the Dutch locale is supposed to be included within the IOS (at least for the 7940-60) and shouldnt require any further configuration. I never had to install any locale files before on other systems similar to this (they worked just fine). But I dont know what is going wrong.

Hall of Fame Super Gold

Re: Problems with dutch locale

Hi, if you use an external tftp server, you will need to copy the files above from the router into your tftp server. This is the way "embedded in ios" works.

hope this helps, please rate post if it does!

New Member

Re: Problems with dutch locale

Okay, it is indeed the first time that I use an external tftp with dutch locales. But where do I get these files? When I download "CME-locale-nl_NL-4.1.0.0.tar" it only contains files for the Java enabled phones like the 7941 and 7961....

Hall of Fame Super Gold

Re: Problems with dutch locale

Do the command I've twice mentioned above: "show telephony-service tftp-bindings". Locate the files you need and copy them via regular copy command.

New Member

Re: Problems with dutch locale

CCME#show telephony-service tftp-bindings

CCME#

There are no files, which is, in my opinion, right since I use the external TFTP server ("cnf-file location TFTP tftp://192.168.1.1/").

But i know where you were looking for. The files are located in "system:/its/netherlands", but these files are 0 kb in size and dont have anything in them. Even when I copy them to my external tftp server.

CCME#dir

Directory of system:/its/netherlands/

84 -rw- 0 7905-dictionary.xml

83 -rw- 0 7960-dictionary.xml

82 -rw- 0 7960-font.xml

85 -rw- 0 7960-kate.xml

81 -rw- 0 7960-tones.xml

86 -rw- 0 SCCP-dictionary.xml

CCME#more 7960-dictionary.xml

CCME#

Hall of Fame Super Gold

Re: Problems with dutch locale

Hi, do configure user-locale, network-locale and a fictions ephone, the files will appear.

In fact the files are not loaded anymore after the phone has switched to a new locale.

277
Views
11
Helpful
12
Replies
CreatePlease to create content