PRI---GWoutside(FAX1 with FXS)---SW3750--(fiber)---SW3750---GWinside-(FXS)-FAX2
The FAX1 can send and receive fax to/from PSTN perfectly, but FAX2 fails randomly, so I think the problem is in IP path. It usually can send fax to PSTN, but the reception fails very often. I have seen show voice call summary, and it negotiates codec g729r8. After a while it change the codec to cisco (it uses cisco fax relay by default). When the reception fails I can't see cisco codec because it disconnects before that. What is the best way to do this implementation? I think the CCM is not necessary involucred.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...