Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with incoming calls over BRI

Hello,

I have some problems on a cisco 2811 with 2 bri cards (4 interfaces). Incoming calls from special (perhaps analogous) participants are not able to reach any extension.

They are all dialing the head-number plus an extension, but in logging it seems they are only dialing the head-number.

I have overlap-receiving activated, and T302 is set to 12seconds.

3 REPLIES
Hall of Fame Super Gold

Re: Problems with incoming calls over BRI

Hi, if you don't receive the extension there is little you can do. Post here the complete setup exchange to check taht again.

New Member

Re: Problems with incoming calls over BRI

As requested... Here is the full config file.

Thank you!

Hall of Fame Super Gold

Re: Problems with incoming calls over BRI

Config is not needed for now. You should collect "debug isdn q931" with "term mon" and see if the called extension comes in.

126
Views
0
Helpful
3
Replies