Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with LD Calls that have "011" in the middle

Gentleman,    

      Everytime a user on our system dials a regular long distance call with 011 in the middle (I.E. 1-212-550-1155) The call drops when the system tries to route it.  We are using CallManager ver 4.1.(3) with a 2811 Voice Gateway.

     The Route Patterns on the Callmanager are as follows:

For standard local and long distance calls -->  9.1[2-9]XX[2-9]XXXXXX

For International calls                              -->  9.011!

     When it hits the voice gateway to be sent off to the PRI we have the following configuration:

dial-peer voice 1002 pots
description dial-peer for Outgoing Calls to Paetec PRI Trunk
translation-profile incoming Inbound_Translation_Profile
translation-profile outgoing Out_Trans_Profile_for_Intl_Call
preference 1
destination-pattern 9T
incoming called-number .
direct-inward-dial
port 0/0/1:23

voice translation-rule 2
rule 1 /011/ // type any international plan any isdn


voice translation-profile Inbound_Translation_Profile
translate called 1

voice translation-profile Out_Trans_Profile_for_Intl_Call
translate called 2

Thanks!

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Problems with LD Calls that have "011" in the middle

The problem is your rule, it changes ANY occurrence of 011 to null. You need to configure it to ^011 so it matches 011 only in the beginning of the dial string.

Match String

Replace String

Dialed String

Replaced String

Comments

/444/  
/555/

4441212

44441212

44414441212

5551212

55541212

55514441212

Match the substring

/^1#/
//

1#456

456

Match 1# at the beginning and replace it with Null.

Number Translation using Voice Translation  Profiles

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
2 REPLIES
Cisco Employee

Re: Problems with LD Calls that have "011" in the middle

The problem is your rule, it changes ANY occurrence of 011 to null. You need to configure it to ^011 so it matches 011 only in the beginning of the dial string.

Match String

Replace String

Dialed String

Replaced String

Comments

/444/  
/555/

4441212

44441212

44414441212

5551212

55541212

55514441212

Match the substring

/^1#/
//

1#456

456

Match 1# at the beginning and replace it with Null.

Number Translation using Voice Translation  Profiles

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
New Member

Re: Problems with LD Calls that have "011" in the middle

Thank you so much!  This problem was aggrevaiting me for a long time!

It was the perfect fix.

237
Views
0
Helpful
2
Replies