Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Procedure for upgrade CUCM 6.XXX to 6.YYY

Who can advice me procedure for upgrade CUCM from version 6.XXX to 6.YYY?

Where I can read about this?

5 REPLIES
Hall of Fame Super Silver

Re: Procedure for upgrade CUCM 6.XXX to 6.YYY

Re: Procedure for upgrade CUCM 6.XXX to 6.YYY

Hi Chris,

This doc is okay, but it does not describe how to upgrade a cluster.

With the windows versions there was always a more or less fool-prove process (boot publisher - then you can start subcriber..".

I kind of miss that in the new docs - they just tell how to find the media (DVD or SFTP).

Cheers,Martin

Hall of Fame Super Silver

Re: Procedure for upgrade CUCM 6.XXX to 6.YYY

Well, it's still the same idea, upgrade the Pub and then move on to the subs.

Chris

Cisco Employee

Re: Procedure for upgrade CUCM 6.XXX to 6.YYY

just to add to the great info from Chris

IP Telephony: ucm 5.1.3 to 6.1.2 upgrade

http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40^1%40%40.2cc19e3f/2#selected_message

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi

Re: Procedure for upgrade CUCM 6.XXX to 6.YYY

Hi,

Below is the procedure in brief:-

1. Check the CUCM Version Compatibility with the Upgrade Version.

2.Take a complete Disaster Recovery Backup of the Publisher Server using a SFTP Server that is always accessible through the Network.

3.Navigate to the OS Administration on the Publisher Server, Login to the OS Administration Page

Click on Software Upgrade -> Install/Upgrade

Use the DVD Media if you are upgrading from the DVD

If you are upgrading from the Remote File System, enter the below:

Directory /

Server x.x.x.x

User Name (SFTP/FTP Username)

User Password (SFTP/FTP Password)

Transfer Protocol:- SFTP/FTP

Click on Next

4. You should see the Upgrade File

5. Continue with the Wizard (if you would like to complete the upgrade automatically, choose to boot to upgraded Partition, else you can do a manual switchover

Settings - Version- Switch Version to boot to the Upgraded Partition).

6. Only upon booting to the upgraded partition, start the Subscriber Upgrade.

Regards,

Thanks and Regards

Sriharshaa Prabhakar

Senior Consultant - Cisco Unified Communications

Network & Telecoms Group

Mannai Corporation, QSC

359
Views
9
Helpful
5
Replies