Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Provide Outside Dialtone

Dear all

I have connected MD110 Ericsson to cisco vocie gateway 2821.

the router is also connected via Ethernet to another router

the router B is also connected to another PBX(B).

the PBX(B) users want to hear PSTN dial tone.but nothing to hear!!

Router B:

dial-peer voice 9 voip

destination-pattern 9

session target ipv4:1.1.1.1(router A)

-------------------

router A:

dial-peer voice 10 pots

destination-pattern 9

forward digit all

port 0/2/0:15 (e1 port to pbx a )

------------------------------

whit this configure everything works but no PSTN dial tone

please help me.

2 REPLIES
Green

Re: Provide Outside Dialtone

What u mean with PSTN dial tone?

MD110 -- 2821 -- Router B -- PBXB

Please clarify

New Member

Re: Provide Outside Dialtone

ok..when you want to call with ordinary phones you can hear DIAL TONE from the PSTN then you will dial your destination number.

MD110 is erricson PBX.

I want that when a user is behind PBX B and dials "9" to access outside via PBX A. it can hear PSTN Dial TOne.

let me know if there is further questions

115
Views
0
Helpful
2
Replies
CreatePlease login to create content