01-11-2012 02:06 PM - edited 03-16-2019 08:57 AM
Scenario:
GatewayA: (2) PRIs
GatewayB: (2) PRIs.
If GatewayA, the network drops, but the PRIs stays up (H323 gateway), will the provider try to GatewayBs (2) PRIs if they configured to? I assume the provider gets a reorder or busy, tries the PRI in the group and so forth until the last PRI, no go and busy signal to the caller.
THanks!
Solved! Go to Solution.
01-11-2012 03:10 PM
No, you need to implement busy out monitor:
http://www.cisco.com/en/US/docs/ios/12_0t/12_0t7/feature/guide/busy_t7.html#wp30177
HTH,
Chris
01-11-2012 03:10 PM
No, you need to implement busy out monitor:
http://www.cisco.com/en/US/docs/ios/12_0t/12_0t7/feature/guide/busy_t7.html#wp30177
HTH,
Chris
01-11-2012 03:19 PM
I thought busyout is for GK monitor?
01-11-2012 03:21 PM
Oh wait, so you put a monitor on the following:
Voice-port 0/1:23
Busyout monitor FA 0/0
This would mean if FA 0/0 is down, then busy out 0/1:23 interface.
Correct?
Thanks!
01-11-2012 03:24 PM
Correct.
Chris
01-11-2012 03:28 PM
Thanks Chris!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: