Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PSTN Redundancy

We have the following topology at one location: Cisco Call Manager <- - > 6608 PRIs <- -> PBX <- -> PSTN

At another facility we have the following topology:

Cisco Call Manager <- - > IOS MGCP G/W<- ->PSTN

Here is my problem - in scenario 1 above, the Cisco dial plan passes the 9 across the 6608s to the PBX and the PBX performs the digit strip.

In scenario 2 above, the CCM PSTN route patterns perform the 9 digit strip and send the call to the PSTN.

How can I create redundancy for phones at both location so that if their primary PSTN connection fails, they will seek the other PSTN connection - specifically, how can I handle the 9 being required in scenario 1 and being stripped in scenario 2?

1 REPLY
Cisco Employee

Re: PSTN Redundancy

Configure the digit stripping at route group level so you dial exactly the same but one keeps the 9 and the other strips it

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

www.cisco.com/go/pdi
152
Views
0
Helpful
1
Replies
CreatePlease to create content