08-19-2013 01:54 AM - edited 03-16-2019 06:55 PM
I have a problem in istallation of subscriber due to hardware problem.
My question is,if now i will configure the system from the publisher (everything including adding phones.....etc ),At any time i will install the subscriber ,then it will get all the configuration from the publisher (get replicated ) ,right ?
Or both of them have to be installed first for the replication to take effect ?
08-19-2013 01:57 AM
Hi Ahmed,
You can add subscriber after some time also. The DB replication will happen after you add the subscriber in the cluster.
Regards
Ronak Patel
Rate all helpful post by clicking stars below the answer.
08-19-2013 02:29 AM
Thanks for confirmation
08-19-2013 01:57 AM
You can add the subscriber server at any time. It doesnt needs to be done now, you can expand your cluster at any time.
Terry
Sent from Cisco Technical Support iPhone App
08-19-2013 02:23 AM
Hi Ahmed,
MAke sure that when u build the subscriber, the credentials entered like Hostname, IP address, Gateway IP Security/Application password are same i.e. which were used when server was build for first time.
regds,
aman
08-19-2013 02:29 AM
Thanks for confirmation
08-19-2013 02:29 AM
Thanks for confirmation
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide