Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Publisher and Subscriber is down

i can access the CLI of the servers but i can not access the GUI, i get an error message that password not correct, and its the same password that i use to log into the CLI interface. the network is down now as all the IP Phones are not working.  the CUCM is version 6.1. anybody with useful information should please assist.

4 REPLIES
Super Bronze

Re: Publisher and Subscriber is down

Hi

Firstly, the CLI admin account and the ccmadmin application administrator account are two separate accounts. They aren't related, but often people use the same username and password for each. In my opinion this is bad, as it creates a link between them that only exists in your imagination...

If you can log on to the CLI, run the following command to assess the state of the services:

Utils service list

Post back the output from each server, this will help determine where the problem lies.

Regards

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Publisher and Subscriber is down

thanks for the response Aaron.

the problem has escalated a bit as the publisher isn't booting properly to

the CLI mode. its hangin and not booting again.

what can be the way forward.

Br

Kunle

Super Bronze

Re: Publisher and Subscriber is down

Hi

Sounds like time for a TAC case then.

Regards

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
New Member

Re: Publisher and Subscriber is down

thanks aaron. i will just raise a TAC case. thanks

179
Views
0
Helpful
4
Replies
CreatePlease login to create content