Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PVDM & CUBE

Hi there,

My customer currently has a Cisco 3825 and has 1 x VWIC2-2MFT-T1/E1 card with 2 x on-board PVDM2-64 already.

1) It currently has CUBE licenses on it but i don't know how many.  Is there any IOS command I can use to check?

2) Assume it already has 60 x CUBE licenses on it and i want to add another 75 x CUBE licenses (making it a total of 135 x CUBE licenses).  Is there any maximum limit of CUBE license a Cisco 3825 can handle?

3) I want to add an extra VWIC2-2MFT-T1/E1 card on to the 3825 router.  Can i put an extra 2 x PVDM2-64 on the VWIC2-2MFT-T1/E1 card?? (since the on-board is already full with 2 x PVDM2-64) - i.e. making the router to have a total of 4 x PVDM2-64 (2 on-board and 2 on the new VWIC2-2MFT-T1/E1 card??

Cheers,
Hunt

1 REPLY
Bronze

PVDM & CUBE

Hi,

The VWIC2-2MFT-T1/E1 card does not have slots for PVDM

The c3825 has four PVDM slots on the motherboard.

see

http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80169812_ps5855_Products_Data_Sheet.html

So you can install your PVDM's on the motherboard. You probably only need a further one PVDM2-64 for your total of 4 T1/E1 but this depends on which codecs you want to use., There's a DSP checker tool on CCO.

http://www.cisco.com/web/applicat/dsprecal/dsp_calc.html

No Comment on licencing. My belief is that CUBE is for voip-voip calls only and on the c28/38xx routers is paper only.

Equally You don't need CCME or SRST so just need to consider the correct level - ie. SP services and above. I'm perfectly happy to be corrected on this.

Adam

962
Views
0
Helpful
1
Replies