Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PVDM3-64 Inquiry

Hi Guys,

 

Does PVDM3-64 support transcoding between g722-64 to g729r8 and vice-versa.

 

Thanks

5 REPLIES
VIP Purple

Hi , PVDM3 does not support G

Hi ,

 

PVDM3 does not support G.723.

 

You can also refer the link for list of supported codecs.

 

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/voice-modules-interface-cards/data_sheet_c78-553971.html

 

regds,

aman

 

New Member

Hi, Aman. Thanks for the

Hi, Aman.

 

Thanks for the reply. I'm referring to G722-64 not G723.

 

And the url you have given says g722 is supported.

 

Table 1. Codec Support on PVDM3 Modules

 

 

Name

Low -Complexity Codecs

Medium-Complexity Codecs

High-Complexity Codecs

PVDM3 module

G.711, ClearChannel, and Fax and Modem Passthrough

G.729a, G.729ab, G.726, G.722, and Fax Relay

G.728, G.729, G.729b, Internet Low Bitrate Codec (iLBC), and Modem Relay

VIP Purple

Hi,  that is correct .G722 is

Hi, 

 

that is correct .G722 is supported.

for sake of knowledge, I shared for G723.

regds,

aman

New Member

Hi, Aman. Thank you. 

Hi, Aman.

 

Thank you.
 

VIP Purple

Hi, when u boot the ISR G2

Hi,

 

when u boot the ISR G2 router, you get messages g723 not supported on PVDM3

 

regds,

aman

72
Views
0
Helpful
5
Replies