Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Silver

QIG DECODE COMMEND

I`m testing names across a H323 link and have previously configured QSIG DECODE on a IOS 12.4 Router however when I tried to enter on the router below I have no option after enter VOICE SERVICE VOIP

Cisco IOS Software, 3800 Software (C3845-IPVOICEK9-M), Version 12.4(13e), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 13-Dec-07 20:10 by prod_rel_team

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

xxxxx uptime is 20 weeks, 4 days, 20 hours, 32 minutes
System returned to ROM by reload at 12:09:47 UTC Sun Jan 31 2010
System image file is "flash:c3845-ipvoicek9-mz.124-13e.bin"

At a Ciso url http://www.cisco.com/en/US/docs/ios/12_3t/voice/command/reference/vrht_q1.pdf     it shows that it was introduced at

This command was integrated into Cisco IOS Release 12.4(9)T.

Any ideas -thanks

3 REPLIES
Hall of Fame Super Gold

Re: QIG DECODE COMMEND

As the document says, update IOS.

Silver

Re: QIG DECODE COMMEND

Am I not already above t

he suggested IOS 124-13e.bin?

Hall of Fame Super Gold

Re: QIG DECODE COMMEND

No you are not. Use T not mainline.

235
Views
0
Helpful
3
Replies