DSCP for Cisco CallManager to Device Interface : This parameter specifies the Differentiated Service Code Point (DSCP) IP classification for protocol control interfaces that are used in Cisco CallManager-to-device communications. Note: You must restart Cisco CallManager servers and associated devices for this parameter change to take effect.
This is a required field.
Default: CS3(precedence 3) DSCP (011000).
Restart the Cisco CallManager service and associated devices for the parameter change to take effect.
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...
The below trick might come handy when you have to add a new node to a cluster but you don't have or is unsure of the security password for the publisher. This procedure has been around for ages.
1) Login into the CLI of the Publisher.