Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

qos on catalyst 6506

Hello,

We are currently deploying auto-qos on all of our switches...

we did all our access switches (mostly 2960) some 3750

and that was ok.

we did  "auto qos voip cisco-phone" on all access ports

we did " auto qos voip trust" on all uplink ports

we tried to do the same on our catalyst 6506 and then

we got this :

Warning: rcv cosmap will not be applied in hardware.

  To modify rcv cosmap in hardware, all of the interfaces below

  must be put into 'trust cos' state:

    Gi2/2 Gi2/4 Gi2/6 Gi2/8 Gi2/10 Gi2/12 Gi2/14 Gi2/16 Gi2/18 Gi2/20 Gi2/22 Gi2/24

Propagating cos-map configuration to:  Gi2/2 Gi2/4 Gi2/6 Gi2/8 Gi2/10 Gi2/12 Gi2/14 Gi2/16 Gi2/18 Gi2/20 Gi2/22 Gi2/24

when we applied "auto qos voip trust" on one interface

what does it mean ?

thanks for help

296
Views
0
Helpful
0
Replies
CreatePlease to create content