I have some computers that have Nortel i2050 softphones installed on them. the computers are connected to different 2950 switches with EI with the capability to support Autoqos for cisco-softphones.There is also a nortel Call manager application installed on one of the port of one of the switches.
Can somebody tell me the right way of enabling QoS inthis environment.
I am thinking this way,
1.enable auto qos voip cisco-softphone on all the switchports that are connected to the PCs running the soft-phones and the Call Manager.
2.enable auto qos voip trust on the switchport that connects to the PABX device.
On the Catalyst fixed configuration switches, you can configure QoS by issuing automatic QoS commands or by issuing standard QoS commands. To use many QoS features, you must have the Enhanced Image (EI) installed on your switch.
I'm not able to access my old voice mail messages all of a sudden. The recording says something like 'the message is currently not available'. This has never happened before in all the years I have been using this system. I have t...
If you have 2 ISR routers, one acting as Failover, do we need to have both the same number of SRST licenses on the 2 routers?
No. You will only need the SRST licenses on the primary router. Because this feature...
You have reached the Cisco Logistics Support Center.. To Check Status of your RMA, visit Product Returns & Replacements (RMA).
Need help? Contact us by Phone or Email.
Phone: 1800 553 2447 Option 4