Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Qos Over Bridged WAN Interface

I have a router 38xx Version 12.4(15)T

I cannot apply QoS to bridged WAN interface, giving the following error;

MERKEZ(config)#interface bvi 42
MERKEZ(config-if)#service-policy output SHAPE-WAN-EDGE-256
GTS : Not supported on this interface

Here is the config;

!

policy-map WAN-EDGE
class Voice
  priority percent 33
class Call-Signaling
  bandwidth percent 5
class class-default
  fair-queue
!

policy-map SHAPE-WAN-EDGE-256
class class-default
  shape average 256000
  service-policy WAN-EDGE

!

interface Serial0/0/0.42 point-to-point
description SSS
bandwidth 256
no cdp enable
frame-relay interface-dlci 46 IETF
bridge-group 42

!

interface BVI42
description SSS
bandwidth 256
ip address 192.168.142.1 255.255.255.252
ip tcp adjust-mss 1300

!

1 REPLY
Hall of Fame Super Gold

Re: Qos Over Bridged WAN Interface

Correct.

Use routing and everything will work fine.

196
Views
0
Helpful
1
Replies