Hi Guys,
I know this is the telephony forum but it's a QoS question based on priority queuing.
Bascially, below is the output of "sh policy-map int <inteface>. There's only one match criteria under CM-3COM-PHONES-EF being matched and it's being given priority bandwidth. My question is how can the class map show 44120 amount of packets matched but under queuing, 0 amount are showing as matched.
Appreciate if you could clear it up for me.
Thanks,
Neil
Service-policy output: PM-QOS-PRIORITY
Class-map: CM-3COM-PHONES-EF (match-all)
44120 packets, 4158010 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: dscp ef (46)
Queueing
Strict Priority
Output Queue: Conversation 40
Bandwidth 100 (kbps) Burst 2500 (Bytes)
(pkts matched/bytes matched) 0/0
(total drops/bytes drops) 0/0
Class-map: class-default (match-any)
126422 packets, 10851836 bytes
5 minute offered rate 3000 bps, drop rate 0 bps
Match: any
Queueing
Flow Based Fair Queueing
Maximum Number of Hashed Queues 32
(total queued/total drops/no-buffer drops) 0/0/0