Re: QSIG Trunk - Seeing disconnect Cause i = 0x81A9
Sometimes with PRI circuits we have to guess why the other side is disconnecting. The best way to troubleshoot this is to simplify the trunk as much as possible, and then start changing the more 'core' features.
If you're looking to get this fixed with the greatest efficiency start with the Meridian, because temporary failure is a code that is equivalent to a '500 Internal Server Error'. This message is sent on IOS gateways when we have DSP errors for example, or when we specific bugs we hit.
In CCM you can try changing your QSIG encoding type in the service parameters, and uncheck any extra check boxes on the MGCP gateway page.
Otherwise, you will want to ask Meridian what's going on with their circuit.
IntroductionCUCM Routing RulesDial String implementation PolicyCUCM Routing LogicSIP URI Call Routing Analysis+++ Case Study: 1 ++++++ Case Study: 2 +++Conclusion
Over the last few months, I have had the privilege of working on SI...
Are you getting this error “Installer User Interface Mode Not Supported. The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The value UI mode identifiers...