You're going to have to give us more information about your question. I'm fairly confused to what you're asking for.
Maybe this helps:
If you have an MGCP gateway, call control is done with MGCP. But, it is still possible to run other protocols on the same router. If you like, you can run H323, SIP, MGCP, and SCCP all on the same router.
Applying a DSP farm on the router means that the DSPs will be SCCP controlled for conferencing, transcoding, or MTPs. The only way for those three things to be controlled is via SCCP.
This means that an MGCP gateway with media resources will run both MGCP and SCCP. MGCP for call control, and SCCP for media resources.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...