Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

question about integrating Gatekeeper and CUCM

Hi all

How to integrate CUCM with Gatekeeper? 

I have a simple lab enviroment: a CUCM 2XXX, a gatekeeper and a CME router with 7...

Configuration on Gatekeeper:

gatekeeper

zone local voiceie labnet.com 1.1.1.1               CUCM zone

zone local cmeie labnet.com  1.1.1.1               CME zone

zone prefix voiceie 2...

no shutdown

show gatekeeper end:

                    GATEKEEPER ENDPOINT REGISTRATION

                    ================================

CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags

--------------- ----- --------------- ----- ---------         ----    -----

2.2.2.2         1720  2.2.2.2         58610 cmeie             VOIP-GW

    H323-ID: CME

    E164-ID: 7001

    E164-ID: 7002

    Voice Capacity Max.=  Avail.=  Current.= 0

143.3.64.11     34042 143.3.64.11     32785 voiceie           VOIP-GW

    H323-ID: Trunk-1_1

    Voice Capacity Max.=  Avail.=  Current.= 0

Total number of active registrations = 2

on CME

1, configure to register with Gatekeeper

2, create voip dial-peer 134 route 2... to Gatekeeper

Try to call from Phone 7001 in CME zone to phone 2001 in CUCM failed.

debuge dial-peer  in CME shows:

.... ....

Jan 25 14:20:46.633: //-1/9B29990F8039/DPM/dpMatchPeersMoreArg:

   Result=SUCCESS(0)

   List of Matched Outgoing Dial-peer(s):

     1: Dial-peer Tag=134

Jan 25 14:20:46.669: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Calling Number=2..., Called Number=, Voice-Interface=0x0,

   Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,

   Peer Info Type=DIALPEER_INFO_SPEECH

Jan 25 14:20:46.669: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:

   Match Rule=DP_MATCH_ANSWER; Calling Number=2...

Jan 25 14:20:46.669: //-1/xxxxxxxxxxxx/DPM/dpMatchPeertype:

   Is Incoming=TRUE, Number Expansion=FALSE

Jan 25 14:20:46.669: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:

   Dial String=, Expanded String=, Calling Number=2...T

   Timeout=TRUE, Is Incoming=TRUE, Peer Info Type=DIALPEER_INFO_SPEECH

Jan 25 14:20:46.669: //-1/xxxxxxxxxxxx/DPM/dpMatchCore:

   Result=-1

.... ....

Debuge dial-peer  in Gatekeeper

Jan 25 14:20:46.655: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   Match Rule=DP_MATCH_DEST; Called Number=2001

Jan 25 14:20:46.655: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:

   No Outgoing Dial-peer Is Matched; Result=NO_MATCH(-1)

Jan 25 14:20:46.655: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersMoreArg:

   Result=NO_MATCH(-1)

Is any thing wrong here?  thanks in advance.   Roy

1 REPLY

question about integrating Gatekeeper and CUCM

If is CUCM dont forget to configure the trunks to the GK take a look on this guide.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b06gatkp.html

Thanks

341
Views
0
Helpful
1
Replies