Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Question about IP Phone didn't collect the missed call log

Dear Sir,

I found one 7940 IP Phone that didn't show the missed call log on the screen and when I press Directory -> Missed Call nothing inside also. But it has received, placed call log. I tried to erase configuration on phone and reset/restart already, it still didn't show missed call log.

Does it broken? Please advise.

Thank you very much.

Best Regards,

Pornchanok P.

5 REPLIES
Green

Re: Question about IP Phone didn't collect the missed call log

Can you replicated it?

Using share lines?

Which firmware version?

SIP or SCCP

Thanks

New Member

Re: Question about IP Phone didn't collect the missed call log

Dear gogasca,

As I remember this phone had change DN profile 1 time (e.g. from 700 to 718). I use Call Manager Express version c2800nm-spservicesk9-mz.124-22.T.bin.

I didn't use a share line but I configure it to ring at the same time as another DN by using this command "button  1o30,1".

For firmware version I didn't take note but it should be the same as the other that works.

It is SCCP.

Thanks

New Member

Re: Question about IP Phone didn't collect the missed call log

I had this same issue almost a year ago and opened a TAC case.  It wound up being a firmware issue.  But your  post sounds like you may have more than one 7940.  Have you compared firmware versions on them.

HTH

Linda

New Member

Re: Question about IP Phone didn't collect the missed call log

It happened to one of 7965 IP phone running on Call manager 7.1 version. Best advise is to delete the device and directory number and re create it agian.

thanks

New Member

Re: Question about IP Phone didn't collect the missed call log

Dear sgeorge911,

Thank you very much for your advise, I will try for this solution.

Thanks

307
Views
0
Helpful
5
Replies
CreatePlease login to create content