I've been reading about MGCP... after the modify connection command is sent from the call agent to the gateway, does any gateway signaling go from gateway to gateway after that point? or does the callagent still do all the signaling on behalf of the gateways?
Every device sends a ACK msg when it recieves a message from the othr end point. In the example that you have stated, the Gateway would send a 200 OK which means the instructions in the message was carried out successfully. Incase there is a failure the message being sent to the CM would not be 200 OK .. it would be 1XX or any other reason code based on the cause of the failure.
Also, as the MGCP gateway is a master/slave endpoint, it always sends every signalling msg that it receives back to the call agent to process it and let the Gateway know what it should do next.
I hope this answers your question, if not, let me know the call state we are discussing as Modify msg is sent under multiple call states between Create Connection and Delete Connection command
SIP traces provide key information in troubleshooting SIP Trunks, SIP
endpoints and other SIP related issues. Even though these traces are in
clear text, these texts can be gibberish unless you understand fully
what they mean. This document attempts to br...
Please find the attached HTML document, download and open it on your PC.
This provides an easy to use form where you simply answer a few
questions and it will render the proper jabber-config.xml file for you
to copy/paste. There is built in logic to verif...
CUCM Database Replication is an area in which Cisco customers and
partners have asked for more in-depth training in being able to properly
assess a replication problem and potentially resolve an issue without
involving TAC. This document discusses the bas...